Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear lights in the Opel Corsa?

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Tail light

In this tutorial, we can see how to remove the rear lights in the Opel Corsa, an extremely simple and fast operation. First of all, make sure that the key is not inserted, so that you can work safely, then open the trunk door and remove the carpet on the back of the headlight in question. Next, disconnect the power connector, unscrew the two white fixing bolts, and, pulling it outwards, separate the headlight from the bodywork. At this point, all that remains is to replace the faulty element and reassemble everything following the reverse procedure.

Posted on 15 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you remove the rear bumper of the Opel Corsa D?
How do you remove the rear bumper of the Opel Corsa D?
Vauxhall Corsa (2006-2014 / Corsa D) The video showing, in this case, an Opel Corsa d without the rear bumper, can be taken into consideration to understand how to disassemble the same b…
Replacement of the rear light of the Opel Corsa
Replacement of the rear light of the Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Today's instructions will allow us to disassemble and replace the rear light and its bulbs of the Opel Corsa in simple steps. First, let's open the r…
How to disassemble the rear headlight of the Opel Corsa
How to disassemble the rear headlight of the Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) To successfully disassemble one of the two rear headlights of your Opel Corsa D on your own, just follow the steps described in the following guide. …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos