Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Indicator Stalk on the Opel Corsa

Model: Vauxhall Corsa Corsa C - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006

See other generations:
Video tutorial

Follow these steps to remove and replace the indicator stalk or light switch buttons on the Opel Corsa. First, get into the driver's seat and start by removing the plastic cover under the steering wheel by unscrewing the two fixing screws.

Once removed, push the indicator stalk to detach it from the dashboard, disconnecting the electrical connector at the back, as shown in the video. Now install the new original indicator stalk by reversing the procedure!


Updated on 17 August 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Life on a 2018 Opel Corsa
How to Reset the Oil Life on a 2018 Opel Corsa
Vauxhall Corsa (2014-2019 / Corsa E) In this tutorial, you will learn how to reset the oil life on a 2018 Opel Corsa by following some simple steps that will allow you to work independen…
Resetting the Oil Change Light on an Opel Corsa E
Resetting the Oil Change Light on an Opel Corsa E
Vauxhall Corsa (2014-2019 / Corsa E) In today's video, we will see how to reset the oil change light on an Opel Corsa E, a model produced from 2014 to 2019. First, turn on the ignition o…
How to Replace the Front Indicator Bulb on an Opel Corsa
How to Replace the Front Indicator Bulb on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Before you can begin, open the bonnet of your Opel Corsa. Start by turning the base of the blown bulb anti-clockwise to remove it from its housing. N…

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos