Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Inspection Light on an Opel Corsa D

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Warning light – error code

To reset the inspection light on an Opel Corsa, start by turning on the ignition without starting the engine and note that the display shows 'insp'. To reset it, turn off the ignition, press the brake pedal, press the button to the left of the speedometer, and simultaneously turn on the ignition without starting the engine, holding them until the 'insp' message stops flashing and dashes appear. At this point, turn off the ignition and release the buttons while keeping the brake pedal pressed. Now, turn the ignition back on and check that the 'insp' message does not illuminate.

Updated on 23 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Vauxhall Corsa (2006-2014 / Corsa D) Thanks to this very short video guide today you will be able to see the entire procedure to follow to reset the inspection on your Opel Corsa D, mode…
Vauxhall Corsa (2006-2014 / Corsa D) Here’s how to replace the bulbs on an Opel Corsa: open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it. On…
Vauxhall Corsa (2014-2019 / Corsa E) The reset of the inspection light of the Opel Corsa is an operation that follows steps that can be carried out independently, also thanks to our tuto…

    Frequently Asked Questions

    • Corsa 2014-2019 - What does error code B1485-2 indicate on an Opel? Read answer
    • Corsa 2014-2019 - What does the code 35 mean on the Opel Corsa? Read answer
    • Corsa 2000-2006 - How to enter the radio code on an Opel Corsa version C? Read answer
    • Corsa 2014-2019 - What does error code 24 on Opel Corsa mean? Read answer
    • Corsa 2019-2026 - Where to find the unlock code of the Opel Corsa car radio? Read answer
    • Corsa 2014-2019 - What does the Opel Corsa code 128 mean? Read answer
    • Corsa 2006-2014 - What does the flashing glow plug light on the Opel Corsa mean? Read answer
    • Corsa 2014-2019 - What does the code 21 of the Opel Corsa mean? Read answer
    • Corsa 2006-2014 - When does code 16 appear in the Opel Corsa? Read answer
    • Corsa 2014-2019 - What is code 89 in the Opel Corsa? Read answer
    • Corsa 2006-2014 - When does Code 84 appear on the Opel Corsa LPG? Read answer
    • Corsa 2014-2019 - What does it mean when the kpa warning light comes on on the Opel Corsa? Read answer
    • Corsa 2006-2014 - How to reset the engine failure warning light in the Opel Corsa? Read answer
    • Corsa 2019-2026 - What does code 23 mean on the Opel Corsa? Read answer
    • Corsa 2014-2019 - What does the Opel Corsa error code 68 mean? Read answer
    • Corsa 2014-2019 - What does error code 23 mean on my Opel Corsa? Read answer
    • Corsa 2014-2019 - What does the code 128 of the 2015 Opel Corsa mean? Read answer
    • Corsa 2014-2019 - What is code 55 in the Opel Corsa? Read answer
    • Corsa 2014-2019 - What does code 16 mean on the Opel Corsa? Read answer
    • Corsa 2019-2026 - What does error code 84 mean on my Opel Corsa? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos