Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Opel Zafira?

Model: Vauxhall Zafira MK 2, A05, Zafira B - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Service warning light

See other generations:
Video tutorial

To reset the Service light on the Opel Zafira, press and hold the button located at the bottom right of the instrument cluster while it is off. Continuing to hold this button, insert the ignition key into the lock and turn it to power up the instrument cluster.

Keep holding the button until the "Insp" message stops flashing.

When it becomes steady, you can release the button, noting that the Service light reset has been successfully completed.


Updated on 24 August 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Warning Light on the Opel Zafira?
How to Reset the Tyre Pressure Warning Light on the Opel Zafira?
Vauxhall Zafira (2011-2019 / Zafira C, MK 3) To reset the Service warning light on the Opel Zafira, first inflate the tyres to the recommended pressure; this pressure value is indicated on the s…
How to Reset the Service Light on the Opel Zafira B?
How to Reset the Service Light on the Opel Zafira B?
Vauxhall Zafira (2005-2011 / MK 2, A05, Zafira B) On the Opel Zafira B, the service light is represented by the "INSP" message that appears on the dashboard display. When this appears, you must promp…
How to reset the engine light on the Opel Zafira?
How to reset the engine light on the Opel Zafira?
Vauxhall Zafira (2011-2019 / Zafira C, MK 3) To reset the engine light on the Opel Zafira, connect a diagnostic tool to the vehicle's OBD port: this port is located on the dashboard just below t…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos