Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Corsa
    4. : Where is the OBD port located on the Opel Corsa D 2013?

Vauxhall Corsa - Video tutorial

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Dashboard
Operation: Where is the OBD port located on the Opel Corsa D 2013?

If you own a 2013 Opel Corsa D and want to find out where the OBD port is located, which allows you to connect a diagnostic tool to the vehicle, then you just need to follow these simple steps. First of all, open the driver's side door and go inside the cabin. Make sure your Opel Corsa D is turned off and locate the hole located in the lower part of the central dashboard. At this point, find the OBD port you were looking for and you're done. Make sure you have a compatible cable to connect the diagnostic tool to it.


Posted on 31 October 2023 by ScegliAuto

    Frequently Asked Questions

    • Corsa 2000-2006 - What are the engine warning lights of the Opel Corsa? Read Answer
    • Corsa 2014-2019 - Why does the speedometer of the Opel Corsa not work? Read Answer
    • Corsa 2014-2019 - What does the service warning light on the Opel Corsa mean? Read Answer
    • Corsa 2006-2014 - What does Code 20 mean on the Opel Corsa? Read Answer
    • Corsa 2014-2019 - What does code 89 refer to on the Opel Corsa? Read Answer

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos