Do it yourself
Frequently asked questions about cars and motorcycles

What does the warning light with a car and a spanner mean in the Vauxhall Astra and how to reset it?

Model: Vauxhall Astra Astra H - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Key

See other generations:
Video tutorial

If the warning light depicting a car and a spanner has illuminated on the dashboard of your Vauxhall Astra, it means it is time for a service, having reached the relevant interval in time or distance. Once this is done, you can manually reset the warning light by following the procedure shown in this tutorial.

First, enter the cabin, then insert the key but leave it in the initial position. Next, press the button on the dashboard, turn on the ignition simultaneously, and keep the button pressed until the interval is fully reset.


Updated on 1 September 2026 by ScegliAuto


Related tutorials

Vauxhall Astra (2015-2022 / Astra K) If the warning light depicting a spanner and a car has illuminated on the dashboard of your Opel Astra, it means it is time for a service as you have…
Vauxhall Astra (2015-2022 / Astra K) In this tutorial, you will learn how to reset the tyre warning light on the Vauxhall Astra, an operation that should only be performed after restorin…
Vauxhall Astra (2004-2010 / Astra H) A deflated, punctured or with a broken electronic control sensor tire causes the warning light on the car's instrument panel to come on, in this case…

    Frequently Asked Questions

    • Astra 2004-2010 - Yellow "car with wrench" warning light on Opel Astra h, what does it mean? Read answer

How to Extract the Spare Wheel from a Mercedes Vito

The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle.

Watch the video!


by ScegliAuto

More videos