Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the headlamp bulbs on the Opel Corsa

Model: Vauxhall Corsa Corsa E - Years: 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight bulb

See other generations:
Video tutorial

When the dipped beam bulb on the Opel Corsa blows, you must replace it as soon as possible to drive safely and avoid penalties. Open the bonnet and position yourself in front of the headlamp where the bulb needs changing.

On the side facing the engine, you will find the protective cover, which you will remove by turning it counterclockwise. Disconnect the connector, which also acts as a lock, remove the bulb, and replace it with a new H7, taking care not to touch the glass.

Insert everything back into the reflector and secure it, then replace the protective cover.


Updated on 4 September 2026 by ScegliAuto


Related tutorials

Removing the Front Headlamp Bulbs on an Opel Corsa
Removing the Front Headlamp Bulbs on an Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) Are the car headlamp bulbs damaged? Let's look at removing the faulty bulbs from the headlamps of an Opel Corsa. Lift the front bonnet of the car and…
Replacing Front Headlight Bulbs on Opel Corsa
Replacing Front Headlight Bulbs on Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Are the bulbs in your Corsa blown? Replace them as follows. Open the bonnet by pulling the lever located at the bottom right of the dashboard, and se…
How to Replace the Front Headlights on the Opel Corsa
How to Replace the Front Headlights on the Opel Corsa
Vauxhall Corsa (1993-2000 / Corsa B) In today's video, you will learn how to replace the bulbs in the front headlights on the Opel Corsa, as well as the headlight units themselves. First…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos