Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Knob on an Opel Zafira?

Model: Vauxhall Zafira MK 2, A05, Zafira B - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Shift knob

See other generations:
Video tutorial

To replace the gear knob on an Opel Zafira, use a tool to lever off the clips located at the base of the leather cover of the gear lever. Once all the clips are released, lift the cover and detach the ring that secures the knob to the end of the lever.

At this point, insert the new knob onto the lever, securing it with the appropriate ring; after installation, reattach the clips at the base of the cover.


Updated on 21 September 2026 by ScegliAuto


Related tutorials

How to Remove and Replace the Gear Knob on the Opel Zafira B
How to Remove and Replace the Gear Knob on the Opel Zafira B
Vauxhall Zafira (2005-2011 / MK 2, A05, Zafira B) In this video, you will learn how to disassemble and replace the gaiter and gear knob on the second series Opel Zafira B in simple steps. First, get …
Replacing the Gear Knob and Gaiter of the Opel Zafira
Replacing the Gear Knob and Gaiter of the Opel Zafira
Vauxhall Zafira (2005-2011 / MK 2, A05, Zafira B) Below are the necessary steps to remove and replace the gear knob and gaiter of the Opel Zafira. First, get into the vehicle and start by detaching t…
How to Replace the Gear Knob on an Opel Zafira
Vauxhall Zafira (2005-2011 / MK 2, A05, Zafira B) Before starting, sit in the driver's seat of your Opel Zafira. Using a thin but sturdy tool, pry off the gear lever gaiter. This will reveal an inter…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos