Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Lights on an Opel Corsa?

Model: Vauxhall Corsa Corsa E - Years: 2014, 2015, 2016, 2017, 2018, 2019
Part: Tail light

See other generations:
Video tutorial

In this tutorial, you will see how to replace the rear lights on an Opel Corsa, an extremely simple and quick operation. First, ensure that the key is not in the ignition, then open the boot and remove both the side panel of the compartment and the storage basket inside.

Next, unscrew the two indicated plastic nuts, grip the light unit, and, pulling it towards you, separate it from the bodywork. At this point, simply disconnect the power connector, transfer the bulbs to the replacement light unit if necessary, and install it by following the reverse procedure.


Updated on 23 September 2026 by ScegliAuto


Related tutorials

How to replace the rear lights in the Opel Corsa?
How to replace the rear lights in the Opel Corsa?
Vauxhall Corsa (2014-2019 / Corsa E) In this tutorial, we can see how to replace the rear lights in the Opel Corsa, an extremely simple and quick operation. First of all, make sure that …
How to replace the rear lights in the Opel Corsa?
How to replace the rear lights in the Opel Corsa?
Vauxhall Corsa (2006-2014 / Corsa D) In this tutorial, you will see how to replace the rear lights in the Opel Corsa, a very simple and quick operation. First, ensure that the key is not…
Replacing the Rear Light of the Opel Corsa
Replacing the Rear Light of the Opel Corsa
Vauxhall Corsa (2014-2019 / Corsa E) Below are the instructions that will allow you to disassemble and replace the rear light and its bulbs on the Opel Corsa in simple steps. First, open…

How to Set the Time in an Audi A4?

In this tutorial, you will see how to set the time in an Audi A4, a very simple and quick operation to perform after replacing the battery or when the time changes. First, insert the key and turn on the instrument cluster. Then, press the "SETUP" button located on the center console. Next, press the upper left arrow button, navigate to the "Time" option, and use the central knob to adjust the clock. Finally, set any necessary formats and save by returning to the main screen.

Watch the video!


by ScegliAuto

More videos