Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear lights in the Opel Corsa?

Model: Vauxhall Corsa Corsa E - Years 2014-2019
Part: Tail light

In this tutorial, we can see how to replace the rear lights in the Opel Corsa, an extremely simple and quick operation. First of all, make sure that the key is not inserted, so that you can work safely, then open the rear door and remove the panel located on the back of the headlight in question. Next, disconnect the power connector, unscrew the two plastic nuts, and, pulling it outwards, separate the headlight from the body. At this point, all that remains is to replace the damaged element and reassemble everything following the reverse procedure.

Posted on 31 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the headlights on the Opel Corsa?
How to adjust the headlights on the Opel Corsa?
Vauxhall Corsa (2006-2014 / Corsa D) In this tutorial, see how to adjust the headlights on the Opel Corsa, a very simple and quick operation. First, position the vehicle in front of a li…
Replacement of the license plate lights of the Opel Corsa
Replacement of the license plate lights of the Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Today, we will see the steps that will allow us to disassemble and replace the license plate lights of the Opel Corsa. First, let's move to the rear …
How to Remove the Rear Bearing on the Opel Corsa D?
How to Remove the Rear Bearing on the Opel Corsa D?
Vauxhall Corsa (2006-2014 / Corsa D) In this video tutorial, you will learn how to remove and replace the rear wheel bearing, or hub, on the Opel Corsa D, by following these simple steps…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos