Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on the Opel Corsa

Model: Vauxhall Corsa Corsa D - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Headlight bulb

See other generations:
Video tutorial

To perform this simple operation, you will first need to remove the front bumper by unscrewing all the screws that secure it from the top, bottom, and also the screws located inside the wing that hold the bumper. Once all the screws are removed, you can extract the bumper by disconnecting the connectors at the back.

Now, unscrew the bolts that secure the headlamps, disconnect the connectors at the back, and carry out the necessary replacements. For reassembly, simply follow the steps in reverse.


Updated on 24 February 2026 by ScegliAuto


Related tutorials

How to Replace the Headlamp Bulb on the Opel Corsa E?
How to Replace the Headlamp Bulb on the Opel Corsa E?
Vauxhall Corsa (2014-2019 / Corsa E) To replace the bulb on the Opel Corsa E, open the bonnet to access the internal part of the headlamp corresponding to the bulb to be replaced. Once t…
How to replace the front headlight bulb on an Opel Corsa D
How to replace the front headlight bulb on an Opel Corsa D
Vauxhall Corsa (2006-2014 / Corsa D) If you own an Opel Corsa D and need to replace one of the front headlight bulbs yourself, simply read the following guide carefully and apply all the…
How to Replace the Front Headlight Bulb on the Opel Corsa D
How to Replace the Front Headlight Bulb on the Opel Corsa D
Vauxhall Corsa (2006-2014 / Corsa D) To replace the front headlight bulb on your Opel Corsa D, follow the instructions in this guide. The operation varies slightly depending on whether i…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos