Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the 2019 Opel Mokka

Model: Vauxhall Mokka Mokka A - Years 2012-2019
Part: Service warning light

If the oil light on the instrument panel of your 2019 Opel Mokka continues to stay on even after you have already changed the oil and the filter, then you need to follow the following procedure to manually reset it. First, get into the car and turn on the ignition if you haven't already done so. Then, press the "Menu" button located in the center of the left lever on the steering wheel and navigate through the menu until you find "Remaining oil life". At this point, hold down the button at the end of the lever until the reset is complete.

Posted on 25 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset "Code 82" on an Opel Mokka
How to reset "Code 82" on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Start by sitting in the driver's seat of your Opel Mokka. Next, turn the key in the ignition switch to turn on the instrument panel. Once done, press…
How to Recalibrate the Tyre Pressure Sensors on an Opel Mokka
How to Recalibrate the Tyre Pressure Sensors on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) In this brief guide, we will provide instructions to allow you to recalibrate the tyre pressure sensors on the Opel Mokka. Before resetting the TPMS …
How to Reset the Oil Service Light on the Opel Mokka?
How to Reset the Oil Service Light on the Opel Mokka?
Vauxhall Mokka (2012-2019 / Mokka A) To reset the Oil Service light on the Opel Mokka, turn on the ignition by rotating the key in the ignition switch. Press the MENU button located on t…

Other guides you may be interested in

    Frequently Asked Questions

    • Mokka 2012-2019 - How do you reset the service light on the Opel Mokka? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos