Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Fan Resistor on the Opel Corsa

Model: Vauxhall Corsa Corsa D - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Blower motor

See other generations:
Video tutorial

In this video, we see how the YouTuber solved the issue of a non-working cabin fan on an Opel Corsa D; on this vehicle, the cabin air fan only worked at maximum speed, while at lower speeds, the fan did not move at all. He rightly thought that the problem could be the resistor, so he obtained a new one. It can be easily found on Amazon with the code B0814QZR81, priced at £19.99 (complete with wiring) and free delivery for Prime customers.

The fan resistor is located under the glove compartment and is connected to a white connector.

It is generally a bright green colour. Once replaced, all fan speeds work normally.

Problem solved.


Updated on 4 October 2026 by ScegliAuto


Related tutorials

Replacing the Air Conditioning Fan Resistor on the Opel Corsa C
Replacing the Air Conditioning Fan Resistor on the Opel Corsa C
Vauxhall Corsa (2000-2006 / Corsa C) In today's tutorial video, you will learn how to remove and replace the air conditioning fan resistor on the Opel Corsa C, following the instructions…
How to Activate the On-Board Computer of an Opel Corsa
How to Activate the On-Board Computer of an Opel Corsa
Vauxhall Corsa (2019-2026 / Corsa F) Before you can begin, sit in the driver's seat of your Opel Corsa. Insert the key into the ignition barrel and turn it clockwise. Next, press the but…
Guide to Replacing the Timing Chain on the Opel Corsa 1.0
Guide to Replacing the Timing Chain on the Opel Corsa 1.0
Vauxhall Corsa (2006-2014 / Corsa D) The information below will assist you in the process of dismantling and replacing the timing chain on the Opel Corsa 1.0. The timing chain replacemen…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos