Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 207
  6. : Lock

Peugeot 207 - Lock

Peugeot 207 (2006-2015 / MK 1)
How to remove the door lock on the Peugeot 207

In today's video tutorial we will see how to remove the lock of the driver's side front door on the Peugeot 207, in simple and quick steps. We open the front …read all…
Posted on 1 March 2024 by ScegliAuto

Cigarette Lighter (1) Airbags (2) Alternator (4) Loudspeaker (1) Shock absorbers (2) Car stereo (15) Roof Rack Bars (1) Battery (17) Coil (1) Air Vents (1) Bushings (1) Gearbox (1) Spark plugs (10) Soft top (1) Bodywork (2) Control unit (2) Key (23) Timing belt (6) V-belt (2) Air conditioning controls (5) -board computer (6) Checks and maintenance (46) Dashboard (5) Gearshift gaiter (1) Drive shaft boot (1) Bearing (1) Brake discs (2) Headlight (5) Tail light (7) Fog lights (4) Particulate filter (1) Air filter (2) Cabin air filter (7) Petrol filter (1) Diesel filter (6) Oil filter (1) Clutch (4) Light bulb (8) Side turn signal light bulb (2) Headlight bulb (9) Rear light bulb (6) Interior lights ceiling light bulb (1) Antifreeze liquid (3) Dashboard light (1) License plate light (4) Third brake light (1) Handle (1) Muffler (1) Engine (1) Starter motor (3) Engine oil (4) Door panel (11) Windshield (1) Front bumper (2) Rear bumper (1) Brake pads (4) Hydraulic pistons (2) Tires (1) Gear Shift Knob (12) Pump (4) Instrument cluster (8) Wheel (1) Fuse box (23) Seat (3) Coolant temperature sensor (2) Lock (1) Lambda sensor (1) Outside rearview mirror (9) Interior rearview mirror (2) Engine mount (1) Windscreen wipers (4) Thermostat (6) Engine head (1) Central tunnel (2) Turbine (1) EGR valve (3) Steering wheel (1)

Replace the steering angle sensor on the Volkswagen Golf 5

When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components.

Watch the video!


by ScegliAuto

More videos