Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 207
  6. : Tail light

Peugeot 207 - Tail light

Peugeot 207 (2006-2015 / MK 1)
How to remove the third stop of the Peugeot 207

In this video tutorial we will see the main instructions that will allow us to remove and replace the third brake light of the Peugeot 207, in the GTI version. …read all…
Posted on 14 April 2024 by ScegliAuto
Peugeot 207 (2006-2015 / MK 1)
How to replace the rear light on a Peugeot 207

Before being able to begin, we will have to open the tailgate of our Peugeot 207. Let's start by moving the side carpet of the luggage compartment. Next we …read all…
Posted on 29 February 2024 by ScegliAuto
Peugeot 207 (2006-2015 / MK 1)
Removal of rear light on Peugeot 207

Open the trunk and observe the area inside the trunk and behind the affected light. You will notice a screw clip: this is the stop that must be unscrewed and …read all…
Posted on 27 January 2024 by ScegliAuto
Peugeot 207 (2006-2015 / MK 1)
Replacement of rear headlight lights on Peugeot 207

We replace the damaged bulbs inside the rear light of the Peugeot 207 car. We open the tailgate of the car and remove the part of the side trim of the trunk, …read all…
Posted on 24 January 2024 by ScegliAuto
Peugeot 207 (2006-2015 / MK 1)
Removing the rear light of a Peugeot 207

Is the rear light damaged? Let's see the disassembly of the rear light of a 207. We lift the bonnet of the luggage compartment, with a socket wrench we unscrew …read all…
Posted on 21 December 2023 by ScegliAuto
Peugeot 207 (2006-2015 / MK 1)
How to replace the rear lights on a Peugeot 207

Before moving on to disassembling the headlight, check all the bulbs and their operation to understand which ones need to be replaced. Now open the trunk and …read all…
Posted on 6 December 2023 by ScegliAuto
Peugeot 207 (2006-2015 / MK 1)
How to remove the rear light of a Peugeot 207

How to remove the rear light of a Peugeot 207? Very simple operation, we see in this video how to proceed: we open the hood of the luggage compartment, then, …read all…
Posted on 21 November 2023 by ScegliAuto

Cigarette Lighter (1) Airbags (2) Alternator (4) Loudspeaker (1) Shock absorbers (2) Car stereo (15) Roof Rack Bars (1) Battery (17) Coil (1) Air Vents (1) Bushings (1) Gearbox (1) Spark plugs (10) Soft top (1) Bodywork (2) Control unit (2) Key (23) Timing belt (6) V-belt (2) Air conditioning controls (5) -board computer (6) Checks and maintenance (46) Dashboard (5) Gearshift gaiter (1) Drive shaft boot (1) Bearing (1) Brake discs (2) Headlight (5) Tail light (7) Fog lights (4) Particulate filter (1) Air filter (2) Cabin air filter (7) Petrol filter (1) Diesel filter (6) Oil filter (1) Clutch (4) Light bulb (8) Side turn signal light bulb (2) Headlight bulb (9) Rear light bulb (6) Interior lights ceiling light bulb (1) Antifreeze liquid (3) Dashboard light (1) License plate light (4) Third brake light (1) Handle (1) Muffler (1) Engine (1) Starter motor (3) Engine oil (4) Door panel (11) Windshield (1) Front bumper (2) Rear bumper (1) Brake pads (4) Hydraulic pistons (2) Tires (1) Gear Shift Knob (12) Pump (4) Instrument cluster (8) Wheel (1) Fuse box (23) Seat (3) Coolant temperature sensor (2) Lock (1) Lambda sensor (1) Outside rearview mirror (9) Interior rearview mirror (2) Engine mount (1) Windscreen wipers (4) Thermostat (6) Engine head (1) Central tunnel (2) Turbine (1) EGR valve (3) Steering wheel (1)

Replace the steering angle sensor on the Volkswagen Golf 5

When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components.

Watch the video!


by ScegliAuto

More videos