Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 207
  6. : Antifreeze coolant

Peugeot 207 - Antifreeze coolant

Antifreeze Coolant Peugeot 207 (2006-2015 / mk 1)

Peugeot 207 (2006-2015 / MK 1)
How to replace the coolant tank of the Peugeot 07

Today we will explain how to replace the coolant tank of the Peugeot 207. The first step to perform is to open the front hood of the car, then cut the clamp …Read all…
Posted on 5 December 2024 by ScegliAuto
Peugeot 207 (2006-2015 / MK 1)
How to Replace the Coolant in the Peugeot 207 1.6

Let’s briefly review the steps to replace the coolant in the Peugeot 207 with a 1.6 petrol engine. First, drain the coolant by disconnecting the hose next to …Read all…
Posted on 11 August 2026 by ScegliAuto
Peugeot 207 (2006-2015 / MK 1)
How to Replace the Coolant in a Peugeot 207?

In this tutorial, see how to replace the coolant in a Peugeot 207, a very simple and quick operation. Before proceeding, ensure that the engine is completely …Read all…
Posted on 20 September 2026 by ScegliAuto
Peugeot 207 (2006-2015 / MK 1)
How to Replace the Coolant in a Peugeot 207?

To replace the coolant in a Peugeot 207, open the bonnet to access the components inside the engine bay. Specifically, you need to access the rear of the …Read all…
Posted on 1 August 2026 by ScegliAuto

Cigarette lighter (1) Airbag (4) Alternator (7) Speaker (3) Shocks (2) Car stereo (21) Anti-roll bar (1) Roof rack bars (1) Battery (22) Ignition coil (2) Air vents (2) Control arm (1) Transmission (2) Spark plugs (12) Convertible top (3) Body (11) Control unit (4) Key (38) Timing belt (8) V-belt (2) A/C controls (8) Onboard computer (11) Checks and maintenance (35) Throttle body (2) Dashboard (7) Shifter boot (1) CV boot (1) Bearing (2) Brake rotors (3) Headlight (15) Tail light (9) Fog lights (6) Diesel particulate filter (1) Air filter (6) Cabin air filter (9) Fuel filter (2) Diesel fuel filter (8) Oil filter (1) Parking brake (1) Clutch (7) Accessory kit (1) Light bulb (7) Side marker bulb (2) Headlight bulb (18) Tail light bulb (11) Interior dome light bulb (1) Antifreeze coolant (4) Instrument panel light (3) License plate light (7) (2) Handle (1) Exhaust muffler (1) Engine (1) Starter motor (6) Engine oil (7) Clock (27) Door trim panel (16) Windshield (1) Front bumper (4) Rear bumper (3) Brake pads (5) Hydraulic pistons (2) Tires (1) Shift knob (19) Pump (5) Fuel pump (1) Car door (1) Push button (1) Instrument cluster (6) Radiator (5) Wheel (2) Fuse box (47) Seat (7) Crankshaft position sensor (1) Engine coolant temperature sensor (4) Door lock (2) Oxygen sensor (1) Suspension system (1) Side mirror (15) Rearview mirror (2) Warning light – error code (9) Service warning light (42) Engine mount (1) Windshield wipers (5) Thermostat (6) Cylinder head (1) Center console tunnel (2) Turbocharger (1) EGR valve (3) Blower motor (1) Steering wheel (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos