Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 207
  6. : Shock absorbers

Peugeot 207 - Shock absorbers

Peugeot 207 (2006-2015 / MK 1)
How to mount the front shock absorbers of the Peugeot 207

To replace the front shock absorbers, first of all it is necessary to have some tools such as the clamps to squeeze the spring and the extractor for …read all…
Posted on 2 November 2023 by ScegliAuto
Peugeot 207 (2006-2015 / MK 1)
Replacement of front shock absorbers

Replacing the front shock absorbers on this car model is particularly laborious since the shock absorber is attached to the hub support through a circumstance …read all…
Posted on 7 September 2023 by ScegliAuto

Cigarette Lighter (1) Airbags (2) Alternator (4) Loudspeaker (1) Shock absorbers (2) Car stereo (15) Roof Rack Bars (1) Battery (17) Coil (1) Air Vents (1) Bushings (1) Gearbox (1) Spark plugs (10) Soft top (1) Bodywork (2) Control unit (2) Key (23) Timing belt (6) V-belt (2) Air conditioning controls (5) -board computer (6) Checks and maintenance (46) Dashboard (5) Gearshift gaiter (1) Drive shaft boot (1) Bearing (1) Brake discs (2) Headlight (5) Tail light (7) Fog lights (4) Particulate filter (1) Air filter (2) Cabin air filter (7) Petrol filter (1) Diesel filter (6) Oil filter (1) Clutch (4) Light bulb (8) Side turn signal light bulb (2) Headlight bulb (9) Rear light bulb (6) Interior lights ceiling light bulb (1) Antifreeze liquid (3) Dashboard light (1) License plate light (4) Third brake light (1) Handle (1) Muffler (1) Engine (1) Starter motor (3) Engine oil (4) Door panel (11) Windshield (1) Front bumper (2) Rear bumper (1) Brake pads (4) Hydraulic pistons (2) Tires (1) Gear Shift Knob (12) Pump (4) Instrument cluster (8) Wheel (1) Fuse box (23) Seat (3) Coolant temperature sensor (2) Lock (1) Lambda sensor (1) Outside rearview mirror (9) Interior rearview mirror (2) Engine mount (1) Windscreen wipers (4) Thermostat (6) Engine head (1) Central tunnel (2) Turbine (1) EGR valve (3) Steering wheel (1)

Replace the steering angle sensor on the Volkswagen Golf 5

When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components.

Watch the video!


by ScegliAuto

More videos