Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 207
  6. : Light bulb

Peugeot 207 - Light bulb

Peugeot 207 (2006-2015 / MK 1)
How to replace the clock lamp of the Peugeot 207

To replace the backlight bulb of the clock in the Peugeot 207, let's get a very thin plastic lever and use it to remove the silver frame around the clock and …read all…
Posted on 18 April 2024 by ScegliAuto
Peugeot 207 (2006-2015 / MK 1)
How to change the brake light bulb of a Peugeot 207.

Let's see how to change the brake light bulb of a Peugeot 207: we need to enter the trunk of the car and go to the corresponding headlight. Here we will find a …read all…
Posted on 12 September 2023 by ScegliAuto
Peugeot 207 (2006-2015 / MK 1)
How to replace the Peugeot 207 license plate bulb?

In order to replace the number plate light bulb on the Peugeot 207 you need to remove the cover light that protects the light bulb, positioned immediately …read all…
Posted on 18 August 2022 by ScegliAuto
Peugeot 207 (2006-2015 / MK 1)
How to replace the headlight bulb on the Peugeot 207?

In order to replace the Peugeot 207 headlight bulb, the hood must be opened so that the rear part of the headlight can be accessed. Here, you will need to …read all…
Posted on 11 July 2022 by ScegliAuto
Peugeot 207 (2006-2015 / MK 1)
How to replace the third brake light bulb on the Peugeot 207?

In order to replace the third brake light bulb of the Peugeot 207, you need to open the tailgate of the luggage compartment and unhook the pins located in the …read all…
Posted on 30 April 2022 by ScegliAuto
Peugeot 207 (2006-2015 / MK 1)
How to change the ventilation lighting bulbs on a Peugeot 207

How do you change the lighting bulbs of the manual air conditioning knobs on a Peugeot 207? Let's see how to proceed in this video. We remove the ventilation …read all…
Posted on 24 November 2023 by ScegliAuto
Peugeot 207 (2006-2015 / MK 1)
How to replace the headlight bulbs of a Peugeot 207

Let's see how to replace the headlight bulbs of a Peugeot 207. Open the front hood by pulling the lever at the bottom right of the dashboard, let's secure it …read all…
Posted on 23 November 2023 by ScegliAuto
Peugeot 207 (2006-2015 / MK 1)
How to replace headlight bulbs on Peugeot 207

Let's see how to replace the headlight bulbs on Peugeot 308. Open the bonnet by pulling the lever located at the bottom right of the dashboard (if present), …read all…
Posted on 15 October 2023 by ScegliAuto

Cigarette Lighter (1) Airbags (2) Alternator (4) Loudspeaker (1) Shock absorbers (2) Car stereo (15) Roof Rack Bars (1) Battery (17) Coil (1) Air Vents (1) Bushings (1) Gearbox (1) Spark plugs (10) Soft top (1) Bodywork (2) Control unit (2) Key (23) Timing belt (6) V-belt (2) Air conditioning controls (5) -board computer (6) Checks and maintenance (46) Dashboard (5) Gearshift gaiter (1) Drive shaft boot (1) Bearing (1) Brake discs (2) Headlight (5) Tail light (7) Fog lights (4) Particulate filter (1) Air filter (2) Cabin air filter (7) Petrol filter (1) Diesel filter (6) Oil filter (1) Clutch (4) Light bulb (8) Side turn signal light bulb (2) Headlight bulb (9) Rear light bulb (6) Interior lights ceiling light bulb (1) Antifreeze liquid (3) Dashboard light (1) License plate light (4) Third brake light (1) Handle (1) Muffler (1) Engine (1) Starter motor (3) Engine oil (4) Door panel (11) Windshield (1) Front bumper (2) Rear bumper (1) Brake pads (4) Hydraulic pistons (2) Tires (1) Gear Shift Knob (12) Pump (4) Instrument cluster (8) Wheel (1) Fuse box (23) Seat (3) Coolant temperature sensor (2) Lock (1) Lambda sensor (1) Outside rearview mirror (9) Interior rearview mirror (2) Engine mount (1) Windscreen wipers (4) Thermostat (6) Engine head (1) Central tunnel (2) Turbine (1) EGR valve (3) Steering wheel (1)

Replace the steering angle sensor on the Volkswagen Golf 5

When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components.

Watch the video!


by ScegliAuto

More videos