Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 207
    4. : How to replace headlight bulbs on Peugeot 207

Peugeot 207 - Video tutorial

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Light bulb
Operation: How to replace headlight bulbs on Peugeot 207

Let's see how to replace the headlight bulbs on Peugeot 308. Open the bonnet by pulling the lever located at the bottom right of the dashboard (if present), let's secure it with the rod. Remove the battery with a socket wrench (to replace the left headlight bulbs), find the headlight inspection cap and (placed in the rear part of the headlight) remove it. At this point we will find the bulbs with metal hooks, take out the lamp holders from the lighthouse and go to extract the damaged bulb with the help of a screwdriver and pliers. We mount the new / led bulb and (always suitable type and size) insert the lamp holder in the headlight housing and close the headlight with the inspection cap. We adjust the headlights with a screwdriver with the pin placed inside the engine compartment. We test the correct functioning of the mounted bulbs.


Posted on 15 October 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 207 2006-2015 - How much does it cost to replace the bulb of a rear headlight of a Peugeot 207? Read Answer
    • 207 2006-2015 - How much do the bulbs for the taillights on the Peugeot 207 cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos