Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 207
    4. : How to change the headlight bulb of a Peugeot 207

Peugeot 207 - Video tutorial

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Headlight bulb
Operation: How to change the headlight bulb of a Peugeot 207

Let's see how to change the headlight bulb of a Peugeot 207 we open the front hood by pulling the lever located at the bottom right of the dashboard, let's put it in safety with the rod. We find the inspection cap of the headlight (located in the rear part of the headlight) and remove it. Once here, we will find the light bulbs with the lamp holders; we take out the lamp holders from the headlight and we go to extract the damaged bulbs with the help of a screwdriver. We assemble the new bulbs and (always suitable type and size) we insert the lamp holder in the lighthouse housing. We reassemble all the previously disassembled pieces.


Posted on 23 November 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 207 2006-2015 - How much does the Peugeot 207 low beam cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos