Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 207
    4. : Control unit

Peugeot 207 - Control unit

Peugeot 207 (2006-2015 / MK 1)
How to program the Peugeot 207 BSI control unit?
In order to program the Peugeot 207's BSI control unit, first of all it must be removed, so that it can be connected to the relative cables of the diagnostic …read all…
Posted on 15 October 2022 by ScegliAuto
Peugeot 207 (2006-2015 / MK 1)
How to remove the BSI control unit on the Peugeot 207 1.6 VTI
In this video we will see the steps on how to remove and replace the BSI control unit that we find on the engine compartment on the Peugeot 207 1.6 VTI. First …read all…
Posted on 3 June 2022 by ScegliAuto
Cigarette Lighter (1) Airbags (2) Alternator (4) Loudspeaker (1) Shock absorbers (2) Car stereo (15) Roof Rack Bars (1) Battery (17) Coil (1) Air Vents (1) Bushings (1) Gearbox (1) Spark plugs (10) Soft top (1) Bodywork (2) Control unit (2) Key (23) Timing belt (6) V-belt (2) Air conditioning controls (5) -board computer (6) Checks and maintenance (46) Dashboard (5) Gearshift gaiter (1) Drive shaft boot (1) Bearing (1) Brake discs (2) Headlight (5) Tail light (7) Fog lights (4) Particulate filter (1) Air filter (2) Cabin air filter (7) Petrol filter (1) Diesel filter (6) Oil filter (1) Clutch (4) Light bulb (8) Side turn signal light bulb (2) Headlight bulb (9) Rear light bulb (6) Interior lights ceiling light bulb (1) Antifreeze liquid (3) Dashboard light (1) License plate light (4) Third brake light (1) Handle (1) Muffler (1) Engine (1) Starter motor (3) Engine oil (4) Door panel (11) Windshield (1) Front bumper (2) Rear bumper (1) Brake pads (4) Hydraulic pistons (2) Tires (1) Gear Shift Knob (12) Pump (4) Instrument cluster (8) Wheel (1) Fuse box (23) Seat (3) Coolant temperature sensor (2) Lock (1) Lambda sensor (1) Outside rearview mirror (9) Interior rearview mirror (2) Engine mount (1) Windscreen wipers (4) Thermostat (6) Engine head (1) Central tunnel (2) Turbine (1) EGR valve (3) Steering wheel (1)

Replace the steering angle sensor on the Volkswagen Golf 5

When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components.

Watch the video!


by ScegliAuto

More videos