Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 207
    4. : EGR valve

Peugeot 207 - EGR valve

EGR Valve Peugeot 207 (2006-2015 / mk 1)

Peugeot 207 (2006-2015 / MK 1)
Where is the EGR Valve Located on the Peugeot 207?
In this video, you can see where the EGR valve is located on the Peugeot 207 and how to proceed if you need to replace it. As shown, it is positioned at the …Read all…
Posted on 9 September 2026 by ScegliAuto
Peugeot 207 (2006-2015 / MK 1)
How to Clean the EGR Valve of a Peugeot 207 1.6 hDi
Before you can start, start the engine of your Peugeot 207 1.6 hDi, then open the bonnet. Begin by disconnecting one end of the hose connected to the EGR valve …Read all…
Posted on 18 May 2026 by ScegliAuto
Peugeot 207 (2006-2015 / MK 1)
How to Clean the EGR Valve on a Peugeot 207
In this video, learn how to clean the EGR valve on a Peugeot 207 Megane without removing it. Lift the bonnet and secure it, then use a screwdriver to unscrew …Read all…
Posted on 15 March 2026 by ScegliAuto
Cigarette lighter (1) Airbag (4) Alternator (7) Speaker (3) Shocks (2) Car stereo (21) Anti-roll bar (1) Roof rack bars (1) Battery (22) Ignition coil (2) Air vents (2) Control arm (1) Transmission (2) Spark plugs (12) Convertible top (3) Body (11) Control unit (4) Key (39) Timing belt (8) V-belt (2) A/C controls (8) Onboard computer (11) Checks and maintenance (35) Throttle body (2) Dashboard (7) Shifter boot (1) CV boot (1) Bearing (2) Brake rotors (3) Headlight (15) Tail light (9) Fog lights (6) Diesel particulate filter (1) Air filter (6) Cabin air filter (9) Fuel filter (2) Diesel fuel filter (8) Oil filter (1) Parking brake (1) Clutch (7) Accessory kit (1) Light bulb (7) Side marker bulb (2) Headlight bulb (18) Tail light bulb (11) Interior dome light bulb (1) Antifreeze coolant (4) Instrument panel light (3) License plate light (7) (2) Handle (1) Exhaust muffler (1) Engine (1) Starter motor (6) Engine oil (7) Clock (27) Door trim panel (16) Windshield (1) Front bumper (4) Rear bumper (3) Brake pads (5) Hydraulic pistons (2) Tires (1) Shift knob (19) Pump (5) Fuel pump (1) Car door (1) Push button (1) Instrument cluster (6) Radiator (5) Wheel (2) Fuse box (47) Seat (7) Crankshaft position sensor (1) Engine coolant temperature sensor (4) Door lock (2) Oxygen sensor (1) Suspension system (1) Side mirror (15) Rearview mirror (2) Warning light – error code (9) Service warning light (42) Engine mount (1) Windshield wipers (5) Thermostat (6) Cylinder head (1) Center console tunnel (2) Turbocharger (1) EGR valve (3) Blower motor (1) Steering wheel (1)

How to Remove the Headrests from the Fiat Panda

In this guide, discover the main steps to disassemble and remove the headrests, both front and rear, from the Fiat Panda, as well as other models from the manufacturer. First, get in the vehicle and press the buttons located at the base of the headrest posts; while holding them down, pull the headrests upwards to remove them, as shown in the video. At this point, reinstall the headrest by lowering it until it clicks and adjust it to the desired height!

Watch the video!


by ScegliAuto

More videos