Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 207
    4. : How to clean the EGR valve of a Peugeot 207

Peugeot 207 - Video tutorial

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: EGR valve
Operation: How to clean the EGR valve of a Peugeot 207

Let's see in this video how to clean the EGR valve of a Peugeot 207 Megane without removing it. Lift the bonnet and put it in safety, then, with a screwdriver, unscrew the locking pins of the ventilation pipe, remove it from the engine compartment or move it. We begin to spray the cleaning liquid present in the can, in the aeration tube (we repeat the operation several times). We also clean the valve with a suitable product, to be drained into the tank. Finally, we reassemble the ventilation pipe in the engine compartment, after having cleaned it from any traces of dirt and encrustations.


Posted on 13 October 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 207 2006-2015 - Where is the EGR valve located in the Peugeot 207 1.6 HDi? Read Answer
    • 207 2006-2015 - How much does the EGR valve of the Peugeot 207 HDi 90 HP cost? Read Answer
    • 207 2006-2015 - Where is the EGR valve located in the Peugeot 207 1.6 HDI? Read Answer
    • 207 2006-2015 - Where is the EGR valve located in a 2006 Peugeot 207 HDi 1.6? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos