Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light of a Peugeot 207

Model: Peugeot 207 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Tail light

Video tutorial

How do you remove the rear light of a Peugeot 207? It is a very simple operation. Follow this guide: open the boot lid, then remove the fabric cover located on the side trim of the boot.

Unscrew the retaining nuts of the rear light (if present), disconnect the power connectors attached to the light, and pull it out from its housing. Replace any damaged bulbs with new ones (same voltage) at hand.

Refit the light with the respective retaining nuts, reattach the inspection cover, and finally test the correct operation of the lights.


Updated on 12 March 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Light Unit from a Peugeot 207
How to Remove the Rear Light Unit from a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) In this mini guide, you will learn how to remove the entire rear light unit from your Peugeot 207. Before starting the procedure, ensure the vehicle …
How to Replace the Front Headlamp Bulb on the Peugeot 207
How to Replace the Front Headlamp Bulb on the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) To complete the replacement of the front headlamp bulb on your Peugeot 207, follow these simple steps. First, park your Peugeot 207 on a flat surface…
How to Replace the Front Headlamp on a Peugeot 207
How to Replace the Front Headlamp on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) How do you remove the front headlamp from a Peugeot 207? To remove the front headlamp, you first need to take off the front bumper. After unscrewing …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos