Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 308
  6. : Air vents

Peugeot 308 - Air vents

Air Vents Peugeot 308 (2007-2014 / t 7, mk 1)

Peugeot 308 (2007-2014 / T7, MK 1)
Replacing the Central Air Vents on Peugeot 308

Before accessing the central air vents, remove the car radio. To do this, unscrew the two rear T20 Torx screws as shown in the video, allowing you to remove …Read all…
Posted on 29 May 2026 by ScegliAuto

Cigarette lighter (2) Airbag (8) Alternator (1) Speaker (4) Shocks (4) Air conditioning (1) Car stereo (29) Roof rack bars (1) Battery (36) Ignition coil (2) Air vents (1) Transmission (4) Spark plugs (5) Glow plugs (1) Convertible top (2) Body (5) Glove compartment (1) Control unit (1) Key (53) Timing belt (13) Air conditioner (1) A/C controls (2) Onboard computer (29) Checks and maintenance (58) Dashboard (8) Brake rotors (2) Side marker light (1) Headlight (8) Tail light (15) Fog lights (6) Diesel particulate filter (2) Air filter (26) Cabin air filter (33) Fuel filter (1) Diesel fuel filter (12) Oil filter (4) Parking brake (2) Clutch (7) Fuel injectors (4) Window switch (1) Accessory kit (1) Light bulb (5) Side marker bulb (3) Headlight bulb (36) Tail light bulb (9) Interior dome light bulb (2) Antifreeze coolant (2) Instrument panel light (1) License plate light (6) (2) Handle (1) Exhaust muffler (1) Engine (3) Transmission fluid (2) Brake fluid (1) Engine oil (7) Power steering fluid (1) Clock (31) Door trim panel (30) Front bumper (15) Rear bumper (8) Brake pads (10) Hydraulic pistons (1) Shift knob (10) Pump (3) Fuel pump (2) Car door (4) Power window switch (2) Instrument cluster (16) Radiator (1) Heater core (4) Wheel (3) Fuse box (34) Seat (9) Engine coolant temperature sensor (1) Parking sensors (1) Door lock (1) Side mirror (17) Rearview mirror (2) AdBlue warning light (32) Warning light – error code (19) (33) Tire pressure warning light (16) Service warning light (124) Fuel cap (1) Windshield wipers (7) Thermostat (1) Center console tunnel (2) EGR valve (3) Blower motor (5) Side window (1) Steering wheel (5)

What Could Cause the Smart Instrument Cluster to Show Three Lines

When the instrument cluster of the Smart shows three lines, it indicates that there are issues with the gearbox and it cannot engage; otherwise, an "N" would appear. To diagnose the problem, you need to obtain an OBDII reader, which can easily be found on any e-commerce platform for a few pounds. The most common cause of failure is damaged wiring from the controller to the gearbox engine connector. These wires may touch the intercooler housing, leading to abrasions, possibly a frayed wire. The video also shows wires touching each other, which can create issues; there may be a damaged sensor, or the problem could be with the gearbox motor. Often, it is the moisture that damages the wiring.

Watch the video!


by ScegliAuto

More videos