Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 308
    4. : Air conditioning controls

Peugeot 308 - Air conditioning controls

Peugeot 308 (2007-2014 / MK 1, T7)
Disassembly of the climate control controls
Remove the car radio from its compartment and disconnect all the connectors on the back. Remove the switch panel under the ventilation grille simply by pulling …read all…
Posted on 23 June 2023 by ScegliAuto
Cigarette Lighter (2) Airbags (2) Loudspeaker (1) Shock absorbers (2) Car stereo (13) Roof Rack Bars (1) Battery (16) Air Vents (1) Gearbox (4) Spark plugs (5) Glow plugs (1) Bodywork (2) Key (22) Timing belt (8) Air conditioning controls (1) -board computer (20) Checks and maintenance (78) Dashboard (2) Brake discs (1) Headlight (4) Tail light (11) Fog lights (4) Particulate filter (2) Air filter (13) Cabin air filter (23) Petrol filter (1) Diesel filter (7) Oil filter (4) Clutch (4) Window lift switch (1) Accessory Kit (1) Light bulb (4) Side turn signal light bulb (3) Headlight bulb (20) Rear light bulb (5) Interior lights ceiling light bulb (2) Dashboard light (1) License plate light (5) Third brake light (2) Handle (1) Engine (1) Gear oil (2) Brake oil (1) Engine oil (2) Door panel (20) Front bumper (7) Rear bumper (2) Brake pads (9) Tires (4) Gear Shift Knob (7) Pump (2) Fuel pump (2) Door (2) Window lift button (1) Instrument cluster (32) Radiator (1) Passenger compartment heating radiator (3) Wheel (3) Fuse box (18) Seat (5) Coolant temperature sensor (1) Lock (1) Outside rearview mirror (12) Interior rearview mirror (1) Windscreen wipers (3) Thermostat (1) Interior blower (3) Steering wheel (1)

How to reset the service in the Opel Antara?

As we can see in this tutorial, resetting the service in the Opel Antara is an extremely simple and fast operation. Before proceeding, of course, we must have completed all the planned maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel, not the engine. At this point, we release the accelerator and press it 3 consecutive times, always all the way. We then restart the panel to verify that the procedure has been carried out correctly.

Watch the video!


by ScegliAuto

More videos