Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling Climate Control Commands

Model: Peugeot 308 T7, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: A/C controls

See other generations:
Video tutorial

Remove the radio from its slot and disconnect all connectors at the back. Pull out the switch panel under the air vent simply by pulling it outwards.

Insert a hand into the compartment and push the air vents outwards until they are removed. At this point, proceed with the repair and then reassemble the vents by inserting them back into their housing.

Reposition the control panel in its slot. Reconnect the previously removed connectors at the back of the radio and reposition it. Remove the plastic trim of the climate control commands to access the supporting screws.


Updated on 2 February 2026 by ScegliAuto


Related tutorials

How to Remove and Repair the Climate Control Buttons on the Peugeot 308
How to Remove and Repair the Climate Control Buttons on the Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) This video provides instructions for removing and repairing the climate control buttons on the Peugeot 308. First, get into the vehicle and remove th…
How to Replace the Climate Control Bulbs on Peugeot 308
How to Replace the Climate Control Bulbs on Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) In this video, learn how to disassemble and replace the bulbs for the climate control on a first-generation Peugeot 308 in simple steps. First, get i…
Removing Radio and LCD Screen on Peugeot 308
Removing Radio and LCD Screen on Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) Remove the cover beneath the climate control buttons by hand and unscrew the two central screws (not the two side ones) underneath. At this point, yo…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos