Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Central Air Vents on Peugeot 308

Model: Peugeot 308 T7, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Air vents

See other generations:
Video tutorial

Before accessing the central air vents, remove the car radio. To do this, unscrew the two rear T20 Torx screws as shown in the video, allowing you to remove the trim pieces beneath the radio.

Then, insert the appropriate double needle keys into the four holes at the corners of the radio and, once fully inserted, extract it (while doing this, disconnect the cables). Now, using a small flathead screwdriver, push the clips that hold the central air vents in place: the clips are clearly shown in the video, so you can see where to push.

Fit the new vents and you're done.


Updated on 19 April 2026 by ScegliAuto


Related tutorials

Peugeot 308 (2013-2021 / T9, MK 2) To replace the car radio of the Peugeot 308, you will need to lever with an object in order to detach the nozzles located on the sides of the central…
Peugeot 308 (2013-2021 / T9, MK 2) These brief steps will guide us through the process of disassembling and replacing the dashboard of the Peugeot 308, following the instructions below…
Peugeot 308 (2007-2014 / T7, MK 1) How do you remove the engine oil filter of the Peugeot 308? Follow this guide to proceed with the replacement. Open the car door and pull up the engi…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos