Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil Change on a Peugeot Metropolis

Model: Peugeot Speedfight
Part: Engine oil

This video is currently unavailable

Today we will look at the oil change on a Peugeot Metropolis. Start the engine for a few minutes so the oil becomes more fluid and drains out faster.

Unscrew the lower drain plug of the engine oil filter compartment, and also the upper filler cap to avoid a vacuum and to aid the flow. Once you have collected the used oil in a container, also remove the oil filter and clean it, or replace it if it has done many miles (in this case, remember to lubricate the O-ring of the new part).

Close the lower drain plug and insert the new lubricant through the upper hole.


Updated on 31 March 2026 by ScegliAuto


Related tutorials

How to replace the variator on the Peugeot Speedfight?
How to replace the variator on the Peugeot Speedfight?
Speedfight To replace the variator on the Peugeot Speedfight, you need to loosen the screws securing the transmission protection panel: this is located on the r…
Removing the Variator on a Peugeot Speedfight
Removing the Variator on a Peugeot Speedfight
Speedfight In today's tutorial video, you will see the steps that will allow you to remove the variator from a Peugeot Speedfight scooter. First, position your …
How to Replace the Shock Absorbers of the Peugeot Speedfight?
How to Replace the Shock Absorbers of the Peugeot Speedfight?
Speedfight To replace the shock absorbers of the Peugeot Speedfight, loosen the bolts that secure them at the top and bottom, both for the front and rear wheels…

How to Dismantle the Centre Fairing of the Piaggio MP3

Below are the instructions to dismantle and replace the centre fairing of the Piaggio MP3 500 and 250 scooter. First, place the scooter on its stand and start by removing the small side plastic cover, unscrewing the fixing screws located underneath. Then, remove the fuel cap and disconnect the centre fairing by unplugging the electrical connector found underneath, as shown in the video. At this point, replace and install the new fairing, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos