Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Variator on a Peugeot Speedfight

Model: Peugeot Speedfight
Part:

Video tutorial

In today's tutorial video, you will see the steps that will allow you to remove the variator from a Peugeot Speedfight scooter. First, position your scooter on the centre stand and remove the left-side cover; to do this, unscrew all the fastening screws.

Once removed, take off the fan by unscrewing its central bolt; then, simply remove the variator located underneath by taking off the drive belt. Now you can replace the rollers and reassemble everything by applying the reverse procedure!


Updated on 10 April 2026 by ScegliAuto


Related tutorials

Instructions for Dismantling the Variator on a Peugeot Speedfight
Instructions for Dismantling the Variator on a Peugeot Speedfight
Speedfight In today's tutorial video, you will see the main instructions on how to dismantle the variator on a Peugeot Speedfight scooter. To dismantle the vari…
How to replace the variator on the Peugeot Speedfight?
How to replace the variator on the Peugeot Speedfight?
Speedfight To replace the variator on the Peugeot Speedfight, you need to loosen the screws securing the transmission protection panel: this is located on the r…
Replacing the Rollers and Variator on the Peugeot Speedfight 50
Replacing the Rollers and Variator on the Peugeot Speedfight 50
Speedfight Today's instructions will show you the procedure for disassembling and replacing the rollers and variator of the Peugeot Speedfight 50 scooter. First…

How to Replace the USB Socket on the Benelli TRK 502?

To replace the USB socket on the Benelli TRK 502, loosen the screws securing the left side panel of the motorcycle, located just below the handlebars: once this panel is freed, you can remove it and locate the USB socket connector. By disconnecting this connector, you can pull the socket out of its housing: then connect the new socket to the connector, inserting it into its housing. After installation, check that the socket works by reinstalling the panel.

Watch the video!


by ScegliAuto

More videos