Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Coolant in a Peugeot Citystar 125?

Model: Peugeot Citystar 125
Part: Antifreeze coolant

Video tutorial

To replace the coolant in the Peugeot Citystar 125, open the designated drain plug located on the right side of the bike. To open the plug, you will need to unscrew the screw located just above it: collect the used coolant in a suitable container placed under the drain pipe.

Once the coolant has completely drained, top up with new coolant by pouring it into the designated pipe. After pouring in the new coolant, you can close the pipe with the appropriate plug.


Updated on 30 April 2026 by ScegliAuto


Related tutorials

Citystar 125 To replace the coolant in the Peugeot Citystar 125, open the designated drain cap located on the right side of the bike. To open the cap, you will ne…
Citystar 125 To top up the brake fluid on the Peugeot Citystar 125, loosen the two screws securing the rectangular cover next to the knob on the right of the stee…
Citystar 125 To replace the pedals on the Peugeot Citystar 125, you need to completely remove the fairing located near the rear wheel, on the side of the pedal th…

How to Set the Time on a Suzuki Burgman 650 Scooter?

In this tutorial, you will learn how to set the time on a Suzuki Burgman 650 scooter, a very simple and quick operation to perform after disconnecting the battery or when switching to daylight saving time. First, insert the key, then turn on the instrument panel and press the two buttons located below the display until the clock starts to flash. At this point, adjust the hour using the "Select" button, set the minutes with the "Adjust" button, and save the setting by pressing both buttons again.

Watch the video!


by ScegliAuto

More videos