Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Peugeot Kisbee
Part:

In this tutorial video, you will see how to remove the original handle and replace it with the top box or helmet holder on the Peugeot Kisbee 50cc. First, open the seat and start by removing the fixing screws of the under-seat compartment to take it out; then unscrew the fixing screws of the handle, as shown in the video. After removing the handle, install the bracket for the top box, ensuring it has the same fitting as the support handle; then secure it properly and reassemble everything, finally placing your helmet holder or top box!

Updated on 9 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to install the rear top box on the Peugeot Kisbee?
How to install the rear top box on the Peugeot Kisbee?
Kisbee To install the rear top box on the Peugeot Kisbee, first lift the seat to access the previously covered under-seat compartment: at the rear, you will…
Replacing the Exhaust on a Peugeot Kisbee 50cc
Replacing the Exhaust on a Peugeot Kisbee 50cc
Kisbee In this video tutorial, you will learn how to remove and replace the exhaust end or the entire exhaust system on a Peugeot Kisbee 50cc scooter, follo…
How to Change the Engine Oil on Peugeot Kisbee 50cc 4T (2020)
How to Change the Engine Oil on Peugeot Kisbee 50cc 4T (2020)
Kisbee Let’s see how to perform the routine maintenance oil change on a 2020 Peugeot Kisbee 50cc 4-stroke scooter. First, position your scooter on the centr…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos