Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Transmission of a Peugeot Metropolis 400i

Model: Peugeot Metropolis 400
Part: Drivetrain

Video tutorial

To dismantle the transmission of a Peugeot Metropolis 400i, you need to open the cover of the casing located on the left rear side of the scooter to access the components underneath. Inside, you will find the clutch bell, variator, and drive belt: you can remove the components by loosening the central bolt of the clutch bell and variator, also removing the corresponding belt.

Once all these parts have been removed, you can install the new clutch, new variator, and new belt, closing everything with the casing.


Updated on 18 June 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plug on the Peugeot Metropolis 400i?
How to Replace the Spark Plug on the Peugeot Metropolis 400i?
Metropolis 400 To replace the spark plug on the Peugeot Metropolis 400i, loosen the bolts securing the panel located between the seat and the footwell. Once the scr…
How to replace the transmission on the Peugeot Metropolis 400?
How to replace the transmission on the Peugeot Metropolis 400?
Metropolis 400 To replace the transmission on the Peugeot Metropolis 400, you need to loosen the screws that secure the cover on the left side of the scooter, allow…
How to reset the service on the Peugeot Metropolis 400 scooter?
How to reset the service on the Peugeot Metropolis 400 scooter?
Metropolis 400 In this tutorial, we will see how to reset the service on the Peugeot Metropolis 400 scooter, a very simple and quick operation that should be done o…

How to Replace the Belt and Rollers on the Piaggio Vespa GTS 300

This guide briefly outlines the steps to remove and replace the belt and rollers of the variator on the Piaggio Vespa GTS 300 scooter, following the instructions below. First, place your scooter on the centre stand and begin unscrewing the screws of the transmission cover to remove it; then unscrew the nut of the fan and that of the clutch bell, as shown in the video. At this point, remove the belt and then the variator, replacing the rollers found inside; install the new belt and reassemble the transmission!

Watch the video!


by ScegliAuto

More videos