|
Do it yourself
| |||
| ||||
|
Model: Peugeot Citystar 125
To replace the rear light bulb on the Peugeot Citystar 125, you need to loosen the two side screws located on the lens of the rear light assembly. Once these screws are loosened, you can detach the lens and access the bulb underneath. The bulb can now be removed from its housing and disconnected from the connector, allowing you to insert a new one. After installation, reposition the lens of the light and secure it with the side screws.
Updated on 18 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Citystar 125
To replace the headlight bulb on a Peugeot Citystar 125, loosen the screws that secure the optical unit within its housing: these screws are located …
Citystar 125
To replace the front indicator bulb on a Peugeot Citystar 125, first remove the corresponding front headlamp. Once the headlamp is removed from its h…
Citystar 125
To replace the rear shock absorber on the Peugeot Citystar 125, lift the seat to access the internal compartment beneath it. Here, you will find the …
|
How to Replace the Coolant in the Piaggio Medley 125?
To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.008
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
