Do it yourself
Frequently asked questions about cars and motorcycles
To replace the air filter of the Peugeot Django 150i, loosen the screws that secure the cover containing it, located on the left side of the bike, near the rear wheel. The screws on the top of the cover will be accessible by removing the seat and the corresponding under-seat compartment of the bike. Once all screws are loosened, you can remove the cover and open it to take out the filter and replace it with a new one; after the replacement, reattach the cover and the under-seat compartment.

Updated on 30 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Django 150 To replace the piston on the Peugeot Django, you need to completely remove the side fairings located under the seat: by removing these fairings, you …
Django 150 In this guide, discover the main steps to remove and replace the carburettor on the Peugeot Django 125-150 scooter. First, place your scooter on the …
Django 150 This guide shows how to replace the engine oil and lubricate the transmission of the Peugeot Django 150 scooter. After securing the vehicle, place a …

How to Replace the Front Brake Pads on a Peugeot Elyseo 125

This guide briefly explains how to remove and replace the front brake pads on the Peugeot Elyseo 125 scooter. First, place your scooter on the centre stand and start unscrewing the bolts securing the front brake caliper to remove it from the disc; then, apply pressure to the caliper piston and clean it from any residual dirt, as shown in the video. At this point, remove and replace the brake pads with new, high-quality ones, installing them in the correct orientation and then refitting the brake caliper!

Watch the video!


by ScegliAuto

More videos