Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This guide shows how to replace the engine oil and lubricate the transmission of the Peugeot Django 150 scooter. After securing the vehicle, place a container between the rear wheel and the stand to collect the used fluid. Unscrew the oil filler cap and, from the bottom of the vehicle, the drain plug from the oil sump and allow the liquid to drain out. Clean the mesh filter and refit the part in position. Fill the reservoir with the correct amount of oil specified in the user and maintenance manual. From the left side of the vehicle, unscrew the two bolts for the transmission lubricant filler and drain and let the liquid flow out. Replace the drain plug and top up the lubricant.

Updated on 30 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Carburettor on the Peugeot Django 125-150
How to Replace the Carburettor on the Peugeot Django 125-150
Django 150 In this guide, discover the main steps to remove and replace the carburettor on the Peugeot Django 125-150 scooter. First, place your scooter on the …
How do you replace the front brake pads of the Peugeot Django 150?
How do you replace the front brake pads of the Peugeot Django 150?
Django 150 It will be possible to replace the front brake pads of the Peugeot Django 150 by loosening the screws that fix the brake caliper to its housing, at t…
How to Replace the Piston on the Peugeot Django
How to Replace the Piston on the Peugeot Django
Django 150 To replace the piston on the Peugeot Django, you need to completely remove the side fairings located under the seat: by removing these fairings, you …

How to Replace the Clutch on a Triumph Speed Triple?

To replace the clutch on a Triumph Speed Triple, loosen the bolts securing the covers of the three casings located on the right side of the bike, namely the starter motor, the engine, and then the clutch. Once these covers are removed, you can access the bolts securing the clutch, unscrew them, and slide the clutch plates out of their housing. This will allow you to insert the new plates into their place, securing everything with the appropriate bolts; finally, reinstall all the casings.

Watch the video!


by ScegliAuto

More videos