Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the front brake pads of the Peugeot Django 150?

Model: Peugeot Django 150
Part: Brake pads

Video tutorial

It will be possible to replace the front brake pads of the Peugeot Django 150 by loosening the screws that fix the brake caliper to its housing, at the top of the disc: once the caliper has been removed, it will be possible to detach it completely so that the pin that locks the pads can also be removed.

These can now be removed from their seat in order to insert the new ones: they must now be fixed by inserting the corresponding pin and locking the caliper on the disc with the screws.

After installation, it will be necessary to check that everything is functioning properly.


Posted on 5 July 2025 by ScegliAuto


Related tutorials

How to Replace the Carburettor on the Peugeot Django 125-150
How to Replace the Carburettor on the Peugeot Django 125-150
Django 150 In this guide, discover the main steps to remove and replace the carburettor on the Peugeot Django 125-150 scooter. First, place your scooter on the …
How to Replace the Engine Oil and Transmission Lubricant of the Peugeot Django 150
How to Replace the Engine Oil and Transmission Lubricant of the Peugeot Django 150
Django 150 This guide shows how to replace the engine oil and lubricate the transmission of the Peugeot Django 150 scooter. After securing the vehicle, place a …
How to Replace the Piston on the Peugeot Django
How to Replace the Piston on the Peugeot Django
Django 150 To replace the piston on the Peugeot Django, you need to completely remove the side fairings located under the seat: by removing these fairings, you …

How to replace the transmission oil in the KTM Exc 300

Today, let's discover how to carry out the routine maintenance service by replacing the transmission oil in the two-stroke enduro bike KTM Exc 300. First, place your bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing the gearbox oil to drain into a container for about ten minutes; then clean the small mesh oil filter, as shown in the video. At this point, unscrew the filler cap and top up with the new gearbox oil, the specifications of which are indicated in the owner's manual!

Watch the video!


by ScegliAuto

More videos