|
Do it yourself
| |||
| ||||
|
Model: Peugeot Django 150
In this guide, discover the main steps to remove and replace the carburettor on the Peugeot Django 125-150 scooter. First, place your scooter on the centre stand and open the seat. Then, remove the under-seat compartment by undoing the screws. Next, disconnect the carburettor hoses and the throttle cable; then detach the carburettor from the intake manifold by undoing the securing screw. Now, remove and replace the carburettor with the new one, following the reverse procedure of disassembly!
Updated on 8 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Django 150
It will be possible to replace the front brake pads of the Peugeot Django 150 by loosening the screws that fix the brake caliper to its housing, at t…
Django 150
This guide shows how to replace the engine oil and lubricate the transmission of the Peugeot Django 150 scooter. After securing the vehicle, place a …
Django 150
To replace the piston on the Peugeot Django, you need to completely remove the side fairings located under the seat: by removing these fairings, you …
|
How to Change the Engine Oil in the Yamaha FZ V 2.0?
As shown in this tutorial, changing the engine oil in the Yamaha FZ V 2.0 is an extremely simple and quick task. First, ensure the engine is completely cold, then position a container underneath and, using a 17mm spanner, loosen the drain plug. Once all the oil has drained from the system, proceed by opening the filter housing with an 8mm socket and replacing the filter. Finally, reassemble everything and add new oil through the upper fill hole. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |