Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a Peugeot Tweet

Model: Peugeot Tweet 125
Part: Engine oil

Video tutorial

Let's see how to change the engine oil on a Peugeot Tweet. To facilitate the draining process, it is preferable to work with the engine warm.

Place the scooter on its centre stand, unscrew the filler cap, locate the drain plug, and position a container underneath to collect the used oil before unscrewing it. Once the oil has drained, replace the plug, tightening it with a torque wrench. Next, remove the mesh filter located on the opposite side, clean it with a lint-free cloth, and after checking the condition of the seals, refit it, again tightening with the torque wrench.

Now, unscrew the three screws of the oil filter cover; once removed, you can replace the filter cartridge and reassemble everything, paying attention to the condition of the seals. Proceed to add the new oil using a funnel; first, pour in 90% of the required amount, start the engine to circulate the oil for a few minutes, and then add the remaining oil while checking that the level is correct.


Updated on 30 August 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on a Peugeot Tweet 125 Scooter?
How to Change the Engine Oil on a Peugeot Tweet 125 Scooter?
Tweet 125 As shown in this tutorial, changing the engine oil on a Peugeot Tweet 125 scooter is a very simple and quick operation. First, wait until the engine …
How to Change the Engine Oil on a Peugeot Tweet 125 Scooter
How to Change the Engine Oil on a Peugeot Tweet 125 Scooter
Tweet 125 .. This guide shows how to change the engine oil on a Peugeot Tweet 125 scooter. The first step is to secure the vehicle.. …
How to replace the engine oil in the Peugeot Tweet 125 scooter?
How to replace the engine oil in the Peugeot Tweet 125 scooter?
Tweet 125 In this tutorial we can see how to replace the engine oil in the Peugeot Tweet 125 scooter, an extremely simple and fast operation. First of all, we …

How to Replace the Chain and Sprocket on a Gilera Smt 50

Today, we will discover the main steps to remove and replace the drive chain and sprocket on the Gilera Smt 50. First, place the motorcycle on a stand and begin by removing the rear wheel, disconnecting the drive chain and unscrewing the central axle of the wheel; then unscrew the screws of the sprocket fixed to the rim to remove it and replace it with the new one (having the same tooth count), as shown in the video. At this point, install the new drive chain and the wheel, finally adjusting the chain as per the instructions.

Watch the video!


by ScegliAuto

More videos