Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Peugeot Kisbee
Part: Light bulb

In this video we can see how to change the front light bulb of the Peugeot Kisbee scooter: first of all, we need to remove the front shield, unscrewing the six torx screws on the edges of the shield that will allow us to remove it easily. In the center we will find the cap where the bulb is inserted; we will have to unscrew the rubber cap slightly and remove it, after removing the electrical connector. Here we replace the bulb with one of those provided and then put the bulb holder back in place (always remember not to touch the bulb of the new bulb with bare hands). put the cap back in place, put the electrical connector back in place and also the six screws that hold the shield in place. Job done.

Posted on 12 June 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Headlamp Bulb Peugeot Kisbee
Replacing Front Headlamp Bulb Peugeot Kisbee
Kisbee In this video tutorial, you will learn how to remove and replace the front headlamp bulb on a Peugeot Kisbee 50cc scooter. First, remove the screws s…
How to Remove the Variator Cover from a Peugeot Kisbee
How to Remove the Variator Cover from a Peugeot Kisbee
Kisbee Before starting, dismount from your Peugeot Kisbee, position it on its central stand, and if possible, lift it. The variator cover is secured in plac…
Replacing the Exhaust on a Peugeot Kisbee 50cc
Replacing the Exhaust on a Peugeot Kisbee 50cc
Kisbee In this video tutorial, you will learn how to remove and replace the exhaust end or the entire exhaust system on a Peugeot Kisbee 50cc scooter, follo…

How to replace the coolant in the BMW S1000 R

Today, we will see in this video tutorial how to bleed and replace the coolant in the BMW S1000 R motorcycle. First, place your motorcycle on a stand and start unscrewing the bleed screw located on the water pump casing, found at the bottom right; let the fluid drain into a container for about ten minutes. Now, unscrew the radiator cap and top up with the new coolant, the correct type for your radiator; fill it to the maximum level mark, starting the engine to circulate the fluid!

Watch the video!


by ScegliAuto

More videos