Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the front headlight bulb of the Peugeot 207?

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Headlight bulb

The procedure for replacing the headlight bulb of the Peugeot 207 is done by opening the hood, so that it is possible to access the components located inside the engine compartment: here it will be possible to locate the inner cover of the headlight, which can be detached to access the bulb located inside. The bulb can be removed from its housing by disconnecting the connector and inserting the new one; the new bulb must be connected to the connector and inserted into the headlight assembly, covering it with the corresponding inner panel.

Posted on 31 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb on a Peugeot 207
How to Replace the Front Headlight Bulb on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Replacing the front headlight bulb on a Peugeot 207 is a very simple and quick task to do yourself. For the replacement, you will need an H7 bulb. Op…
How to replace the headlight bulb on the Peugeot 207?
How to replace the headlight bulb on the Peugeot 207?
Peugeot 207 (2006-2015 / MK 1) To replace the headlight bulb on the Peugeot 207, open the bonnet to access the rear of the headlight. Here, remove the circular protective cover to …
How to replace the front headlight bulb of the Peugeot 207
How to replace the front headlight bulb of the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) The replacement of the front bulb on the Peugeot 207 car follows simple steps. We start by opening the front hood and immediately remove the cap of t…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos