Do it yourself
Frequently asked questions about cars and motorcycles

How to change the diesel fuel filter on the Peugeot 3008 diesel MK1

Model: Peugeot 3008 T84, MK 1 - Years 2009-2016
Part: Diesel fuel filter

In this video we see how to change the diesel filter on a Peugeot 3008 MK1: we open the hood and remove the engine cover, in order to see the diesel filter. We disconnect the electrical connector and the three filter tubes; then with a socket wrench we remove the filter support bolts, which should not be removed; they are meant to stay in place. Now we can remove the filter, which should be placed in a container for liquid recovery, and unscrew the three screws on the cover, then remove the gasket and clean the cover well and put the new cartridge in place, reassemble the fixing screws, fit the cover and put the filter back in its housing, connect the tubes and connectors and the job is done.

Posted on 27 September 2024 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 3008 (2009-2016 / T84, MK 1) Before you can start, open the bonnet of your Peugeot 3008. Begin by disconnecting and moving the hoses connected to the diesel filter, unclipping th…
Peugeot 3008 (2016-2023 / MK 2, P84) This video shows how to remove and replace the diesel filter, air filter, and oil filter in a Peugeot 3008. Specifically, we will see the procedure f…
Peugeot 3008 (2009-2016 / T84, MK 1) To replace the diesel filter of the Peugeot 3008, open the hood, remove the engine cover, disconnect the electrical connector and the three fuel line…

Other guides you may be interested in

    Frequently Asked Questions

    • 3008 2016-2023 - Where is the diesel filter located on my Peugeot 3008? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos