Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD port located on the Peugeot 2008?

Model: Peugeot 2008 MK 1 - Years 2013-2019

The OBD diagnostic socket on a Peugeot 2008 vehicle is located inside the cabin, specifically behind the passenger side glove compartment. To access the socket for use, you will need to open the glove compartment and then remove the left side cover. The socket is highlighted by its fluorescent orange color. It will definitely be useful for computerized diagnostics when it becomes difficult to recognize a problem with the naked eye, or to speed up the reset of multiple warning lights at the same time when performing maintenance such as a service.

Posted on 10 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD port located on the Peugeot 2008?
Where is the OBD port located on the Peugeot 2008?
Peugeot 2008 (2013-2019 / MK 1) The OBD port or diagnostic port on a Peugeot 2008 vehicle is located inside the cabin, specifically under the driver's dashboard. Unlike other models…
Where is the OBD port on the Peugeot 2008?
Where is the OBD port on the Peugeot 2008?
Peugeot 2008 (2013-2019 / MK 1) If you want to connect a professional diagnostic tool to your car to identify and correct any errors in the ECU, but do not know where the OBD port i…
Where to Find the OBD Port on Peugeot 2008
Where to Find the OBD Port on Peugeot 2008
Peugeot 2008 (2019-2026 / MK 2) If you intend to locate the OBD port inside the cabin of your second series Peugeot 2008, simply read the following guide carefully and apply the des…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos