Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD port on the Peugeot 2008?

Model: Peugeot 2008 MK 1 - Years 2013-2019

If you want to connect a professional diagnostic tool to your car to identify and correct any errors in the ECU, but do not know where the OBD port is located, do not worry as you will find all the necessary instructions below. First, enter the car and reach the front passenger seat. Next, open the glove compartment and remove the plastic cover located on the side of it. Finally, locate the OBD port you were looking for (easily identifiable by its orange colour).

Updated on 18 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD port of the Peugeot 2008 located?
Where is the OBD port of the Peugeot 2008 located?
Peugeot 2008 (2013-2019 / MK 1) In the following mini guide you will find the description of all the steps you need to follow in order to locate the OBD port inside the cabin of you…
How to Program the Key of the Peugeot 2008?
How to Program the Key of the Peugeot 2008?
Peugeot 2008 (2019-2026 / MK 2) To program the key of the Peugeot 2008, you need to use a specific programming device: this must be inserted into the OBD port of the vehicle. The po…
Where to Find the OBD2 Port on the Peugeot 2008
Where to Find the OBD2 Port on the Peugeot 2008
Peugeot 2008 (2019-2026 / MK 2) If you have not yet located the OBD2 port on your Peugeot 2008 second series, do not worry as this guide provides all the information you need to fin…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos