Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front seat of the Peugeot 208

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Seat

This short and simple guide will show us the process of disassembling and replacing the front seat of the Peugeot 208. First of all, we get into the car and start unscrewing all the fixing screws we find on the front seat guides, moving the seat back and forth to access them, using a T40 Torx key; then we disconnect the electrical connector of the seat belt to permanently remove the seat from the cabin, as shown in the video. At this point, if necessary, we replace the front seat, reassembling everything!

Posted on 29 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to remove the passenger seat of the Peugeot 208
How to remove the passenger seat of the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) To disassemble the front passenger seat of your first series Peugeot 208, just follow the steps described in the following guide. First of all, park …
How to Reset the "Service" Light on a Peugeot 208
How to Reset the "Service" Light on a Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) Before you can begin, sit in the driver's seat of your Peugeot 208. Start by pressing and holding the "SET" button located at the bottom right of the…
How to remove the rear seat of the Peugeot 208
How to remove the rear seat of the Peugeot 208
Peugeot 208 (2019-2026 / UB, UJ, UP, MK 2, UW) In this video we can see how to remove the rear seat of the Peugeot 208: with a flat head screwdriver, we release the clip located at the bottom of t…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos