Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD port located on the 2019 Peugeot Partner?

Model: Peugeot Partner Tepee MK 3 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Checks and maintenance

See other generations:
Video tutorial

If you don't know where the OBD port is located inside the cabin of your Peugeot Partner third series (year 2019), don't worry because below you will find all the directions you need. First of all, you need to reach the driver's seat in the vehicle and make sure you have completely turned off the instrument panel.

Then proceed with the removal of the entire plastic panel located in the lower area of the dashboard. Once you have removed the panel in question, you finally have free access to the OBD port you were looking for and have successfully completed the task.


Posted on 4 February 2025 by ScegliAuto


Related tutorials

Where is the OBD Port on a 2015 Peugeot Partner?
Where is the OBD Port on a 2015 Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) To find the OBD port inside your Peugeot Partner, it only takes a few seconds. All you need to do is carefully read the following guide and follow th…
Where is the OBD port on the Peugeot Partner?
Where is the OBD port on the Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) If you own a 2018 Peugeot Partner and need to use a diagnostic tool to identify and resolve any ECU errors, read the following guide carefully to dis…
Where is the OBD Port in the Peugeot Partner Van?
Where is the OBD Port in the Peugeot Partner Van?
Peugeot Partner Tepee (2008-2018 / B9) In this video, you can see where the OBD port is located in the Peugeot Partner van, useful if you need to check the error codes stored in the ECU us…

Other guides you may be interested in

    Frequently Asked Questions

    • Partner Tepee 2008-2018 - Where is the Peugeot Partner jack located? Read answer

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos