Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear lights in the Peugeot 407?

Model: Peugeot 407 MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Tail light

Video tutorial

In this tutorial, we can see how to remove the rear lights in the Peugeot 407, an extremely simple and quick operation. First of all, make sure that the key is not inserted, so that you can work safely, then open the trunk door and remove the panel located on the back of the headlight in question.

Next, unscrew the two fixing nuts using an 8mm socket wrench, disconnect the power connector, and, pulling it outwards, separate the headlight from the bodywork. At this point, all that remains is to replace the faulty element and reassemble everything following the reverse procedure.


Posted on 19 February 2025 by ScegliAuto


Related tutorials

Removing the Front Headlights of the Peugeot 407
Removing the Front Headlights of the Peugeot 407
Peugeot 407 (2004-2012 / MK 1) Follow the steps below to remove and replace the front headlights of the Peugeot 407. First, open the bonnet of your car and start by removing the fr…
How to Remove the Rear Bumper from a Peugeot 407 SW?
How to Remove the Rear Bumper from a Peugeot 407 SW?
Peugeot 407 (2004-2012 / MK 1) To remove the rear bumper from a Peugeot 407 SW, loosen all the screws that secure it to its housing. These screws are located at the bottom of the b…
How to Remove the Car Radio in the Peugeot 407?
How to Remove the Car Radio in the Peugeot 407?
Peugeot 407 (2004-2012 / MK 1) Removing the car radio in the Peugeot 407, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, ensure that the …

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos