Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Headlights of the Peugeot 407

Model: Peugeot 407 MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Headlight

Video tutorial

Follow the steps below to remove and replace the front headlights of the Peugeot 407. First, open the bonnet of your car and start by removing the front bumper, unscrewing all the fixing screws. Once removed, unscrew the fixing screws of the headlamp unit, disconnecting the electrical connector of the bulbs located at the rear, as shown in the video.

At this point, install the new front headlight, securing it properly, and finally refit the front bumper!


Updated on 28 August 2026 by ScegliAuto


Related tutorials

Removing the External Handle of a Peugeot 407
Removing the External Handle of a Peugeot 407
Peugeot 407 (2004-2012 / MK 1) Removing the external handle of a Peugeot 407. Open the car door; unscrew the screw located at the side of the door as shown in the video, remove the…
How to disassemble the rear lights in the Peugeot 407?
How to disassemble the rear lights in the Peugeot 407?
Peugeot 407 (2004-2012 / MK 1) In this tutorial, we can see how to remove the rear lights in the Peugeot 407, an extremely simple and quick operation. First of all, make sure that …
Removing the Cabin Fan on Peugeot 407
Removing the Cabin Fan on Peugeot 407
Peugeot 407 (2004-2012 / MK 1) Here’s how to remove the heater radiator on a Peugeot 407. Remove the plastic cover from the centre tunnel (located under the centre tunnel on the le…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos