Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you disassemble the bumper of the Peugeot 407?

Model: Peugeot 407 MK 1 - Years 2004-2012
Part: Front bumper

The disassembly of the Peugeot 407 bumper, we will see in this video tutorial how to disassemble the front bumper, is related to various reasons, repainting, repairing damage, replacing with a more sporty aftermarket model, etc. It starts with removing the wheel arches to access the rear pins, then the pins along the entire upper and lower edge are removed, then the bumper lining is pulled off. At this point, we can proceed to disassemble the bumper bar, bolted in several points, as explained and shown in the aforementioned video.

Posted on 29 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Bumper from a Peugeot 407 SW?
How to Remove the Rear Bumper from a Peugeot 407 SW?
Peugeot 407 (2004-2012 / MK 1) To remove the rear bumper from a Peugeot 407 SW, loosen all the screws that secure it to its housing. These screws are located at the bottom of the b…
Removing the Front Bumper of the Peugeot 407
Removing the Front Bumper of the Peugeot 407
Peugeot 407 (2004-2012 / MK 1) This guide shows you how to remove and replace the front bumper of the Peugeot 407, following the instructions below. First, open the bonnet of the v…
Removing the Front Bumper of a Peugeot 407
Removing the Front Bumper of a Peugeot 407
Peugeot 407 (2004-2012 / MK 1) Let's see how to replace the front bumper of a Peugeot 407. Replace the front bumper if it is damaged or if you want to remove other parts. Lift the …

Other guides you may be interested in

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos