Do it yourself
Frequently asked questions about cars and motorcycles

How to locate the headlight fuse in a Peugeot 208

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Fuse box

Quiet, to find the headlight fuse on your car the first thing to do is to locate the fuse panel which is usually located under the dashboard on the driver's side or in the engine compartment near the battery. In this type of car, you need to open the dashboard and look for the panel cover. Once opened, you will find a map that indicates which fuse corresponds to each component including the headlights. The headlight fuse should be easily readable on the map. If the fuse is blown, you will need to replace it with a new one of the same amperage, usually 10 or 15A. Also check for other issues such as burnt out bulbs. If you don't feel comfortable doing it yourself, a mechanic can help you in just a few minutes.

Posted on 1 April 2025 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 208 (2012-2019 / A9, MK 1) If the electric window lifters on your Peugeot 208 have suddenly stopped working, first check the status of the respective fuses, whose location is i…
Peugeot 208 (2012-2019 / A9, MK 1) In this video tutorial, you can see where the fuse box is located on the Peugeot 208; it will be possible to identify the cause of the fault before p…
Peugeot 208 (2012-2019 / A9, MK 1) If you want to correctly and safely disassemble one of the rear lights of your first series Peugeot 208, just follow all the steps described in our n…

Other guides you may be interested in

    Frequently Asked Questions

    • 208 2012-2019 - Where is the Peugeot 208 fan fuse located? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos